Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
341
Assuming that no conflicting user or group policies have been configured, if a user attempted to access:
• An FTP server at 10.0.0.1, the user would be blocked by Policy 1
• An FTP server at 10.0.1.5, the user would be blocked by Policy 2
• An FTP server at 10.0.0.10, the user would be granted access by Policy 3. The IP address range 10.0.0.5 -
10.0.0.20 is more specific than the IP address range defined in Policy 1.
• An FTP server at ftp.company.com, the user would be granted access by Policy 3. A single host name is
more specific than the IP address range configured in Policy 2.
Users > Local Users
This section provides an overview of the Users > Local Users page and a description of the configuration tasks
available on this page.
• Users > Local Users Overview on page 341
• Removing a User on page 342
• Adding a Local User on page 342
• Editing User Settings on page 343
For global configuration settings, see Global Configuration on page 413.
Users > Local Users Overview
The Users > Local Users page allows the administrator to add and configure users.
Local Users
The Local Users section allows the administrator to add and configure users by specifying a user name, selecting
a domain and group, creating and confirming password, and selecting user type (user, administrator, or read-
only administrator).
NOTE: In this example, the user would not be able to access ftp.company.com using its IP address
10.0.1.3. The Secure Mobile Access policy engine does not perform reverse DNS lookups.
TIP: When using Citrix bookmarks, in order to restrict proxy access to a host, a Deny rule must be
configured for both Citrix and HTTP services.
NOTE: Users configured to use RADIUS, LDAP, or Active Directory authentication do not require passwords
because the external authentication server validates user names and passwords.
To Next Page
Loading...
Need help?
General
