Dell SMA 200 User Manual

Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
333
Configuring High Availability Settings on a
Virtual Appliance
The High Availability > Settings page provides settings for configuring High Availability.
To enable High Availability for a Virtual Appliance and configure the options in the High
Availability Settings section:
1 In a browser, log in to the primary unit and navigate to the High Availability > Settings page.
2Select Enable High Availability.
The HA interface can only be set when the unit is in the HA unconnected mode, and both units must be
set to the same interface.
3Select Primary Appliance if this Virtual Appliance is the primary appliance in the HA pair.

Dell SMA 200 Specifications

General

Brand	Dell
Model	SMA 200
Category	Switch
Language	English