Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
417
5 Enter the domain name or the IP address of a host machine on the LAN in the Name or IP Address field.
6 Select the service type in the Service drop-down list.
7Click Accept to update the configuration. After the configuration has been updated, the new global
bookmark is displayed in the bookmarks list in the Edit Global Settings window.
Edit EPC Settings
To configure global End Point Control profiles for local groups or users:
1 Navigate to either the Users > Local Users or Users > Local Groups page.
2 Click the configure icon next to Global Policies. The Edit Global Policies window is displayed.
3Click the EPC tab. The EPC window is displayed.
4 Configure EPC global settings and add or remove device profiles, as explained in Users > Local Groups on
page 382 and Users > Local Groups on page 382.
NOTE: Depending on the service you select from the Service drop-down list, additional fields
might appear. Fill in the information based on the service you select. For example, if you select
RDP - ActiveX or RDP - Java, a Screen Size drop-down list and other additional fields are
displayed.
To Next Page
Loading...
Need help?
General
