To Next Page

To Previous Page

Figure 117 Installing the chassis bracket

CL5499

7. Place the chassis bracket over the center rail of the cable tray. Clip the free end

of the cable chains to the center flange on the chassis bracket.

Figure 118

Installing the bezel

8. Place the bezel over the front of the tray by pressing the release buttons on the

bezel and placing it over the retaining slots on the tray. Release the buttons and

the tabs will mate with the slots.

9. Refer to the application guide and connect the cables as required. Dress the

cable runs with proper cable strain reliefs when routing to the rack.

Removing and Replacing FRUs

136 EMC Data Domain DS60 Expansion Shelf Installation and FRU Replacement Hardware Guide

Questions and Answers:

Need help?

Do you have a question about the EMC Data Domain DS60 and is the answer not in the manual?

EMC Data Domain DS60 Specifications

General