Epson SC-F9200 series Service Manual

SC-F9200 Series Revision C
ADJUSTMENT Overview 281
SE Group Confidential (Related Staff Only)
4.1.5 Service Program Basic Operations
This section describes the basic operations of the Service Program.
 System Requirements
 OS: Windows Vista, 7, 8/8.1
 Interface: USB, Network
 Startup
1. Install the Communication Driver.
2. Double-click the “servprog.exe”. A screen that asks if you want to carry out
the NVRAM Backup appears.
3. Select Yes to start the NVRAM Backup tool, or select No to display the
Service Program Menu screen.
4. Select the printer you want to adjust from Model Selection, and start the
adjustment.
Figure 4-1. Service Program
C A U T I O N
 Save the Service Program on the desktop or directly under the
C drive. If the storage location is deep in the hierarchy, some
program tools may not work correctly.
 If adjust the print adjustment, select the Media Setup menu
and change the Select Media setting to RIP Setting “0” on the
control panel.
C H E C K
P O I N T
The network can be used only for the following two adjustments.
 MAC Address Input
 USB Port and Network Communication Check

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English