Epson SC-F9200 series Service Manual

SC-F9200 Series Revision C
ADJUSTMENT Boards Related Checks and Adjustments 350
SE Group Confidential (Related Staff Only)
4.14.7 Flag for extending life
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select Flag for extending life.
3. Click [Run]. When a confirmation message is displayed, click [OK].
4. Click [Finish].
5. Turn the printer OFF.
C H E C K
P O I N T
The following procedure must Not be done for the printers below.
 SC-F9200 series which have 1 label at the Left Upper Cover.
(Refer to CR HP Sensor (p164) to find out how to check.)
Regarding to Only SC-F9200 series which have 2 labels at the Left
Upper Cover, you need to perform the following procedure.

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English