Epson SC-F9200 series Service Manual

SC-F9200 Series Revision C
ADJUSTMENT Boards Related Checks and Adjustments 345
SE Group Confidential (Related Staff Only)
4.14.4 Serial Number Input
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Start the Service Program and select Serial Number Input.
3. Enter a 10-digit serial number of the printer, and click [Write].
The serial number is written to the NVRAM on the Main Board.
4. When you click [Read], the serial number written on the NVRAM is
automatically read and displayed on the screen.
5. Click [Finish].
6. Turn the printer OFF to finish the adjustment.
Figure 4-69. [Serial Number Input] Screen

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English