NVR User Manual 061220NA 125
The Alarm Host IP refers to the IP address of the remote PC on which the CMS (Client Management
System) software (e.g., iVMS-4200) is installed, and the Alarm Host Port must be the same as the
alarm monitoring port configured in the software (default port is 7200).
• Multicast IP: The multicast can be configured to realize live view for more than the maximum
number of cameras through the network. A multicast address spans the Class-D IP range of
224.0.0.0 to 239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to
239.255.255.255.
When adding a device to the CMS (Client Management System) software, the multicast address
must be the same as the device’s multicast IP.
• R
TSP Port: The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in
entertainment and communications systems to control streaming media servers.
Enter the RTSP port in the RTSP Port text field. The default RTSP port is 554, and you can change it
according to requirements.
• Server Port and HTTP Port: Enter the Server Port and HTTP Port in the text fields. The default Server
Port is 8000 and the HTTP Port is 80, and you can change them according to requirements.
NOTE: The Server Port should be set to the range of 2000−65535, and it is used for remote
client software access. The HTTP port is used for remote IE access.
Figure 180, Configure More Settings
4. Click the Apply button to save and exit the interface.
11.2.7
Configuring HTTPS Port
Purpose
HTTPS provides authentication of the Web site and associated Web server that one is communicating
with, which protects against man-in-the-middle attacks. Perform the following steps to set the https port
number.
Example:
If you set the port number as 443 and the IP address is 192.0.0.64, you may access the device by inputting
https://192.0.0.64:443
via the Web browser.
NOTE: The HTTPS port can be configured only through the Web browser.
1. Open the Web browser, input the IP address of device, and the Web server will select the language
automatically according to the system language and maximize the Web browser.
2. Input the correct user name and password, and click the Login button to log in to the device.
To Next Page
Loading...
Need help?
General
