NVR User Manual 061220NA 72
2) Click Apply, and in the pop-up message box, click Yes to save your settings.
3) Click OK to go back to the upper level menu.
4) Repeat the above steps to configure more HDD groups.
7. Choose the Channels that you want to save the record files in the HDD group.
1) Select Advanced on the left bar.
2) Choose Group number in the drop-down list of Record on HDD Group
3) Check the channels you want to save in this group.
4) Click Apply to save settings.
NOTE: After having configured the HDD groups, you can configure the Recording settings
following the procedure provided in
Chapter 5.2-5.7
.
5.10 Files Protection
Purpose
You can lock the recording files or set the HDD property to read-only to protect the record files from being
overwritten.
5.10.1
Locking the Recording Files
• L
ock File when Playback
1. Enter Playback interface, Menu > Playback.
2. Check the checkbox of channel(s) in the channel list, and then double-click to select a date on the
calendar.
To Next Page
Loading...
Need help?
General
