NVR User Manual 061220NA 131
Figure 190, UPnP™ Settings Finished-Manual
5. Enter the virtual server setting page of router; fill in the blank of Internal Source Port with the internal
port value, the blank of External Source Port with the external port value, and other required contents.
NOTE: Each item should be corresponding with the device port, including server port, http port,
RTSP port, and https port.
Figure 191, Setting Virtual Server Item
NOTE: The above virtual server setting interface is for reference only, it may be different due to
different router manufacturers. Contact your router manufacturer if you have any
problems with setting the virtual server.
11.2.10
Configuring Virtual Host
Purpose
Y
ou can directly get access to the IP camera management interface after enabling this function.
NOTE: The Virtual host function can be configured only through the Web browser.
1. Enter the Advanced settings interface, Configuration > Network > Advanced Settings > Other.
Figure 192, Advanced Settings Interface
1. Check the of Enable Virtual Host checkbox.
2. Click the Save button to save the setting.
To Next Page
Loading...
Need help?
General
