NVR User Manual 061220NA 138
2) Click the Search button to search for available IP SAN disks.
3) Select the IP SAN disk from the list shown.
4) Click the OK button to add the selected IP SAN disk.
NOTE: Up to 1 IP SAN disk can be added.
Figure 209, Add IP SAN Disk
6. After having successfully added the NAS or IP SAN disk, return to the HDD Information menu. The added
NetHDD will be displayed in the list.
NOTE: If the added NetHDD is uninitialized, select it and click the Init button for initialization.
Figure 210, Initialize Added NetHDD
12.3 Managing HDD Groups
12.3.1
Setting HDD Groups
Purpose
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular
HDD group through HDD settings.
1. Enter the Storage Mode interface, Menu > HDD > Advanced > Storage Mode.
2. Set the Mode to Group.
To Next Page
Loading...
Need help?
General
