NVR User Manual 061220NA 50
Follow the steps to set the Preset location where you want the PTZ camera to point to when an event
takes place.
1. Enter the PTZ Control interface, Menu > Camera > PTZ.
Figure 57, PTZ Settings
2. Use the directional button to wheel the camera to the location where you want to set the preset; and
the zoom and focus operations can be recorded in the preset as well.
3. Enter the preset no. (1−255) in the preset text field, and click the Set button to link the location to the
preset.
4. Repeat steps 2−3 to save more presets.
5. You can click the Clear button to clear the preset location information, or click the Clear All button to
clear the location information of all the presets.
4.2.2
Calling Presets
Purpose
This feature enables the camera to point to a specified position such as a window when an event takes
place.
1. Click the button PTZ i
n the lower-right corner of the PTZ setting interface; or press the PTZ button on
the front panel or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the
right-click menu to show the PTZ control panel.
2. Choose the Camera in the drop-down list.
To Next Page
Loading...
Need help?
General
