NVR User Manual 061220NA 30
Figure 27, Record Settings
14. Click OK to complete the startup Setup Wizard.
2.3 Adding and Connecting IP Cameras
2.3.1
Activating the IP Camera
Purpose
Before adding the camera, make sure the IP camera to add is in active status.
You can activate the IP camera when activating the device. See
Activating Your Device
.
1. Select the Add IP Camera option from the right-click menu in live view mode or click Menu > Camera >
Camera to enter the IP Camera Management interface.
For IP cameras detected online in the same network segment, the Password status shows whether it
is active or inactive.
Figure 28, IP Camera Management Interface
To Next Page
Loading...
Need help?
General
