HIKVISION EKI-K82T46 User Manual

NVR User Manual 061220NA 53
4.2.5 Customizing Patterns
Purpose
Patterns can be set by recording the PTZ movement. You can call the pattern to have the PTZ move
according to the predefined path.
1. Enter the PTZ Control interface, Menu > Camera > PTZ.
Figure 62, PTZ Settings
2. Choose pattern number in the drop-down list.
3. Click the Start button, and click corresponding buttons in the control panel to move the PTZ camera,
and click the Stop button to stop it.
The movement of the PTZ is recorded as the pattern.
4.2.6 Calling Patterns
Purpose
Follow the procedure to move the PTZ camera according to the predefined patterns.
1. Click the PTZ button in the lower-right corner of the PTZ setting interface, or press the PTZ button on
the front panel, or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the
right-click menu to show the PTZ control panel.
2. Click the button to show the general settings of the PTZ control.

HIKVISION EKI-K82T46 Specifications

General

Brand	HIKVISION
Model	EKI-K82T46
Category	Network Hardware
Language	English