NVR User Manual 061220NA 152
Figure 236, Export Log Files
7. Select the backup device from the Device Name drop-down list.
8. Select the format of the log files to be exported. Up to 15 formats are selectable.
9. Click the Export to export the log files to the selected backup device.
You can click the New Folder button to create a new folder in the backup device, or click the Format
button to format the backup device before log export.
NOTE: Please connect the backup device to NVR before operating log export.
14.3 Importing/Exporting IP Camera Info
Purpose
The added IP camera information can be generated into an Excel file and exported to the local device for
backup, including the IP address, manage port, admin password, etc. The exported file can be edited on
your PC, like adding or deleting the content, and copy the setting to other devices by importing the Excel
file to it.
1. Enter the camera management interface. Menu > Camera > IP Camera Import/Export.
2. Click the IP Camera Import/Export tab, the content of detected plugged external device appears.
3. Click the Export button to export configuration files to the selected local backup device.
4. To import a configuration file, select the file from the selected backup device and click the Import
button. After the importing process is completed, you must reboot the NVR.
14.4 Importing/Exporting Configuration File
Purpose
The NVR configuration files can be exported to a local device for backup, and the configuration files of one
NVR can be imported to multiple NVR devices if they are to be configured with the same parameters.
14.4.1
Exporting Configuration File
To Next Page
Loading...
Need help?
General
