NVR User Manual 061220NA 84
6.1.6
Playing Back by System Logs
Purpose
Play back record file(s) associated with channels after searching system logs.
1. Enter Log Information interface, Menu > Maintenance > Log Information.
2. Click the Log Search tab to enter Playback by System Logs.
3. Set search time and type, and click the Search button.
Figure 115, System Log Search Interface
4. Choose a log with record file, and click the button to enter the Playback interface.
NOTE: If there is no record file at the time point of the log, the message box “No result found”
will pop up.
To Next Page
Loading...
Need help?
General
