NVR User Manual 061220NA 20
2. Enter the administrator’s username and password in the dialog box for authentication.
3. Click the Yes button.
NOTE: Do not press the Power button again when the system is shutting down.
Rebooting the NVR
In the Shutdown menu, you can also reboot the NVR.
1. Enter the Shutdown menu by clicking Menu > Shutdown.
2. Click the Logout button to lock the NVR or the Reboot button to reboot the NVR.
2.1.2
Activating Your Device
Purpose
For the first-time access, you need to activate the device by setting an admin password. No operation is
allowed before activation. You can also activate the device via Web Browser, SADP software, or Client
software.
1. Input the same password in the text field of Create New Password and Confirm New Password.
Figure 7, Set Admin Password
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong password
of your own choosing (using a minimum of eight characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. We also recommend that you
reset your password regularly. Especially in high security systems, resetting the password
monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
To Next Page
Loading...
Need help?
General
