1.3 Measurement Flowchart
14
You can start and stop recording either manually or using real-time control. In either case, repeat record-
ing can be used.
To start a new recording session after recording has ended, press the DATA RESET key, set the instru-
ment to [SETTING] mode, and then press the START/STOP key. (Note that pressing the DATA RESET
key will erase the displayed measurement data.)
Starting and Stopping Recording
Manual Real-time control
Start
Press . Press to start recording at the set time and date.
Stop
Press to stop
recording.
Stops automatically at the specified stop time.
Press the to force stop.
Notes See: "Time Start" (p.58)
Repeated
recording
Recording is performed at the specified interval (once a week or once a day), and files
containing measurement data are created at the specified interval. Repeated recording
can be used to record for up to 55 weeks (approx. 1 year).
See: "Repeat Record" (p.59)
Relationship between the operation status and key operations
[SETTING] [RECORDING]
[ANALYZING]
Start
recording
Stop
recording
Revert to [SETTING] mode
Set
Do not remove the SD memory card while recording or analyzing data. Doing so
may cause data on the card to be corrupted.
To Next Page
Loading...
Need help?
General
