14.1 Cleaning
215
Chapter 14 Maintenance and Service
14
Maintenance
and Service Chapter 14
14.1 Cleaning
Instrument
• To clean the instrument/ device/ product, wipe it gently with a soft cloth moistened
with water or mild detergent. Never use solvents such as benzene, alcohol, acetone,
ether, ketones, thinners or gasoline, as they can deform and discolor the case.
• Wipe the LCD gently with a soft, dry cloth.
Clamp Sensor
Measurements are degraded by dirt on the mating surfaces of the clamp-on sensor, so
keep the surfaces clean by gently wiping with a soft cloth.
To Next Page
Loading...
Need help?
General
