Hioki PW3198 User Manual

3
3.3 Pre-Operation Inspection
31
Chapter 3 Measurement Preparations
Before using the instrument the first time, verify that it operates normally to ensure that the no
damage occurred during storage or shipping. If you find any damage, contact your dealer or Hioki
representative.
3.3 Pre-Operation Inspection
Metal Exposed
No Metal Exposed
Inspect the voltage cords
1
Do not use if damage is pres-
ent, as you could receive an
electric shock. Contact your
dealer or Hioki representative
if you find any damage.
2
Yes
Inspect the clamp sensors
Is a clamp cracked or damaged?
An error is
displayed
No
Yes
3
Yes
Inspect the instrument
Is damage to the instrument evident?
No
Contact your dealer or Hioki
representative if you find any
damage.
4
Yes
Inspection after turning on instrument
1. Does the self-test (model and version) dis-
play appear?
(The version number may be changed to the
latest version number.)
No
2. Is the [WIRING] page of the settings
screen being displayed?
The power cord may be dam-
aged, or the instrument may
have internal damage.
Please contact your dealer or
Hioki representative.
The instrument may be dam-
aged internally.
Please contact your dealer or
Hioki representative.
Inspection complete
HIOKI PW3198
POWER QUALITY ANALYZER
Ver 1.00
Is the insulation of the voltage cord to be
used damaged, or is bare metal exposed?

Hioki PW3198 Specifications

General

Brand	Hioki
Model	PW3198
Category	Measuring Instruments
Language	English