MAINTENANCE AND ADJUSTMENT OF THE UTV
- 115-
WARNING
:
lways adjust both shock absorber sprin
reload to the same setting. Uneven
adjustment can cause poor handling and loss
of stability.
NOTE:
The spring preload of the shock absorbers can
be adjusted to suit the operator’s preference,
weight, and the operating conditions.
1. Adjust:
• spring preload Turn the adjuster to increase①
or decrease the spring preload.
Standard position: 2
Minimum (Soft) position: 1
Maximum (Hard) position: 5
CHECKING THE TIRES
WARNING
:
• TIRE CHARACTERISTICS
a. Tyre characteristics influence the handling
of vehicle’s. If other tire combinations are
used, they can adversely affect you
vehicle’s handling characteristics and ar
therefore not recommended.
Size Type
Front 6PR 26 × 8-12
Rear 6PR 26× 10-12
• TIRE PRESSURE
a. Recommended tire pressure
Front 70Kpa
Rear 70KPa
b. Tyre pressure below the minimum
specification could cause the tire to dislodge
from the rim under severe riding conditions.
The following are minimu
ms:
Front 63Kpa
Rear 63Kpa
To Next Page
Loading...
Need help?
General
