CHASSIS
- 193-
MALFUNCTION INSPECTION
Appearance malfunction inspection
No. Phenomenon Measure
1 Plastic cover damaged
1. Replace new plastic cover.
2. Check whether installation supporter deformed, repairing
or re-painting is needed before replacing new plastic cover.
3. Re-paste decals and re-rivet warning labels.
2 Bumper damaged
1. Replace new bumper.
2. Check whether installation supporter deformed or
damaged, repairing or re-painting is needed before
replacing new bumper.
3
Frame toe-board damaged
1. Replace new frame toe-board.
2. Check whether gearbox and differential of front and rear
axle damaged or leakage.
3. Check plastic cover whether deformed or damaged,
repairing deformed or damaged plastic cover.
4 Warning labels Replace damaged and vague warning labels
Brake system malfunction inspection
No. Phenomenon Measure
1 Locked braking system
1. Check whether brake disc plates deformed.
2. Check whether hydraulic cylinder of brake clamp locked
or brake clamp assembly parts deformed.
2 Brake performance degressive
1. Check whether disc plates abrasion exceeded limits.
2. Check whether brake shoe of clamp abrasion exceeded
limits or polluted by friction material such as oil.
3、Check whether the oil cup of brake fluid lack oil.
3
Grinding noises emerged from
front brake or brake plate
become red during drive due to
superheat.
1. Check whether brake plate deformed.
2. Check whether hydraulic cylinder of brake clamp locked
or brake clamp assembly parts deformed.
4
Grinding noises emerged from
rear brake or brake plate
become red during drive
1. Check whether brake plate deformed.
2. Check whether hydraulic cylinder of brake clamp locked
or brake clamp assembly parts deformed.
3. Check whether rear brake clamp parking institution
running flexible or return accurately.
5
Off tracking by braking at
high-speed
1. Check whether front brake power deviation from left and
right is within specified scope.
2. Check whether front brake power degressive caused to
rear wheel locked before front wheel in brake process.
3. Check whether left and right absorber spring force
deviation is exceeded specified value.
To Next Page
Loading...
Need help?
General
