OPERATOR'S STATION
1-95
Front/Rear Wiper Switch
Operate wiper switches (1)(2) to move the front and rear
windshield wipers.
IMPORTANT: The washer motor may become
damaged if washer fluid is continuously used for
more than 20 seconds or the washer motor pump
switch is operated with no fluid in the washer tank.
Take care about the switch operation time and the
fluid level in the washer tank.
Do not operate the washer motor for too long
and keep the washer fluid at the correct level. In
freezing weather, use windshield washer solvent
that will not freeze.
Front Window Wiper Switch
HI : The front windshield wiper operates at fast
speed.
LO : The front windshield wiper operates at slow
speed.
INT : The front windshield wiper intermittently
operates.
OFF : The front windshield wiper stops moving and the
wiper blade is returned to the pre-start position.
(Push) : Washer fluid squirts from the front nozzle and the
front windshield wiper operates.
Rear Window Wiper Switch
ON : Rear windshield wiper operates.
OFF : The rear windshield wiper stops moving and the
wiper blade is returned to the pre-start position.
(Push) : Washer fluid squirts from the rear nozzle and the
rear windshield wiper operates.
115Z7-AK-F Wiper SW
115Z7-AK-R Wiper SW
Rear Window Wiper Switch
Front Window Wiper Switch
1 2
115Z7B-1-81-1
To Next Page
Loading...
Need help?
General
