OPERATING THE MACHINE
5-10
Adjustment of Dual Lift Arm Auto Leveler
d
WARNING:
Take extra care to prevent injury and/or death when
adjusting the lift arm auto leveler (kickout).
Apply the parking brake to prevent the machine
from moving unexpectedly. Chock the wheels with
blocks. Keep bystanders away from the vicinity of
the machine.
IMPORTANT:
When the lift arm auto leveler (kickout) function is
activated with the bucket loaded, the bucket may
stop at the set position.
Height setting of lowering direction can not be done
when the lift arm is above the horizontal position of
the lift arms. Also, height setting of raising direction
can not be done when the lift arm is below the
horizontal position of the lift arms.
The lift arm auto leveler is a device that automatically stops
the lift arm at the preset position while lowering or raising the
lift arm. It is convenient to change the setting of stop position
by using this function when the machine is constantly used in
a specific way, such as when loading trucks that are equipped
with side boards of the same height.
Refer to "Dual Lift Arm Auto Leveler Switch" in the
OPERATOR'S STATION section to adjust the stop position.
To Next Page
Loading...
Need help?
General
