TRANSPORTING
6-2
Loading / Unloading on Trailer
d
WARNING: Be sure to use a loading dock or a ramp
for loading/unloading.
Always load and unload the machine on a firm, level
surface.
Ramp/Loading Dock:
1. Before loading, thoroughly clean the ramps, loading
dock and flatbed. Dirty ramps, loading docks, and
flatbeds with oil, mud, or ice on them are slippery
and dangerous.
2. Chock (1) the truck and trailer wheels while using a
ramp or loading dock.
3. Ramps must be the right size and able to bear the
load. Be sure that the incline of the ramp is less than
15°.
4. Loading docks must be the right size and able to bear
the load. to support the machine and have an incline
of less than 15°.
1 1
10 to 15°
M4GB-06-001
M4GB-06-002
To Next Page
Loading...
Need help?
General
