OPERATOR'S STATION
1-110
Hold Switch
Press hold switch (1) while letting the machine travel in the
auto shift mode, and the machine holds the speed gear
range that is currently displayed on the monitor.
Operate one of the following to release the hold function:
Press the hold switch again, Change the gear range,
Change the travel mode, or Press DSS (down shift switch).
f
NOTE: Lockup clutch does not function while holding the
speed range.
Loading Control Lever
Joystick Steering Lever
Fingertip Control Type
Multi-Function Joystick Type (Option)
MNEC-01-041
MNEC-01-044
1
1
95Z7-1-85-1
1
(Upper one)
To Next Page
Loading...
Need help?
General
