MAINTENANCE
7-89
Check Parking Brake Force
--- every 10 hours (daily)
d
WARNING: Check the machine in a place where
no one is present or ahead in the drive traveling
direction. Keep bystanders away from the machine.
After confirming the service brakes work normally, test the
parking brake.
1. Move the machine to a safe open place on a 15
degrees inclining dry surface slope.
2. Stop the machine with the service brake.
3. Turn ON parking brake switch (1).
4. Release the service brakes.
5. The machine should not move.
IMPORTANT: If machine moves when parking brake
switch is ON, there is some problem with parking
brake. Consult your nearest authorized dealer. Do
not operate until problem has been corrected.
1
115Z7B-1-81-1
To Next Page
Loading...
Need help?
General
