Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 105
5.13.1.2 System Config . Device . I/O Binding
1. On the System Configuration screen, select <I/O binding>.
The System Config . Device . I/O Binding screen appears.
2. On the Device Configuration . I/O Binding screen, select each
entity to configure the MSC-L.
5.13.1.2.1 System Config . I/O bindings . Inputs
On the System Config . Device. I/O Binding screen, select <Inputs>.
The following entity is displayed.
5.13.1.2.2 System Config . I/O bindings . Outputs
On the System Config . Device . I/O Binding screen, select <Outputs>.
The following entity is displayed.
5.13.1.3 System Config . Device . Communication
1. On the System Config . Device screen, select <Communication>.
Entity Description Value range
[Emergency shutdown]
With this entity you can select the
physical input of the emergency
shutdown input.
Any of the unused DI-DC-n, DI-AC-n, QPI-
n, AI-n, or None.
The default value is
<None>.
[TAS - stand alone switch]
With this entity users can select work
flow to be local (Enable) or remote
(Disabled)
Any of the unused DI-DC-n, DI-AC-n, QPI-
n, AI-n, or None.
The default value is
<None>.
Entity Description Value range
[Emergency stop]
With this entity you can select the
physical output of the emergency stop.
Any of the unused DO-SSR, DO-EMR, PO,
or None.
The default value is
<None>.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English