Name: Honeywell Fusion4 MSC-L
Brand: Honeywell
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Operation - LAD Functions

Part No.: 4418309_Rev09 Fusion4 MSC-L

Honeywell Installation & Operation Manual 5 - 297

3. On the Diagnostic screen, select <System health> on any one of the

boards and then select <OK> on the IR controller or the LAD. The test

"Good/No Error" must appear on the screen, as shown in the Diag-

nostic - Module Health screen.

5.21.3 Test LED and LAD Information Submenus

On the LAD screen, select <Test LED> to view the diagnostics or the I/O

tests on the “Test” LED of LAD.

The LAD . Test LED screen appears, which displays the I/O tests

available on the MSC-L.

NOTE: The Test LED on the LAD displays the status of the

health of the selected I/O.

Select the status of the I/O, which is displayed on the

Test LED of LAD, and then select

<OK>. The Test

Questions and Answers:

Need help?

Do you have a question about the Honeywell Fusion4 MSC-L and is the answer not in the manual?

Honeywell Fusion4 MSC-L Specifications

General