Operation - Transfer
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 285
5.20.2.1 Transaction Details
Transaction Record
Parameter
Description
MSC-L Transaction Header
Transaction Record Version The version of this transaction record.
Transaction Number The number of this transaction record.
Device Type This describes the type of Fusion4 device the
transaction record comes from.
Number of Batches The number of batches in this transaction.
W&M Intended Transaction If the device is configured as W&M intended during
the complete transaction.
Base Temperature Reference temperature that a user defines for
volume correction.
Base Pressure Reference pressure that a user defines for volume
correction.
Units of Temperature The engineering units associated with all
temperature measurements in this record.
Units of Density The engineering units associated with all density
measurements in this record.
Units of Pressure The engineering units associated with all pressure
measurements in this record.
Site Name The name of the site where the transaction
happened.
Transaction Start Time The time at which the transaction began (sampled
from RTC entity).
Transaction Start Date The date when the transaction began (sampled
from RTC entity).
Transaction Stop Time The time at which the transaction ended (sampled
from RTC entity).
Transaction Stop Date The date when the transaction ended (sampled
from RTC entity).
Preset Type This specifies if the preset value is expressed as
volume or mass value.
Bay Number The number of the bay the device is installed in.
Communications Mode It expresses if the transaction is done in Local (No
Communications) or Remote (Communications to
TAS) Mode.
User Language The language used by operator during transaction.
Contract ID A string that represents the Contract or Order
Number
Vehicle ID A string that uniquely identifies the vehicle used in
the transaction.
To Next Page
Loading...
Need help?
General
