Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 109
5.13.1.3.1.4 Modbus
On the System Config . COM-n screen, select <Modbus>.
The System Config . COM-n . Modbus screen appears with the
following entities.
5.13.1.3.1.5 Authorization
On the System Config . COM-n screen, select <Authorization>.
The System Config . COM-n . Authorization screen appears with the
following entities.
5.13.1.3.2 Ethernet
The following table lists the entities available for the Ethernet
communication on the System Config . ETH-n screen.
Entity Description Value range
[Modbus byte order]
With this entity you can select the byte
order used for the data when Modbus
protocols are used.
<Little endian> (default)
<Big endian>
Entity Description Value range
[Database selection]
With this entity you can select the
authorization database used to
authorize users or objects connected to
this device.
<User> (default)
<Object>
<Users and objects>
[Attribute]
Applicable if the database selected is
<object>. With this entity you can add
an attribute to the selected object.
[Loading bay]
With this entity you can enable the
required loading bay
<Bay1> (default)
<Bay2>
<None>
Entity Description Value range
[DHCP status]
With this entity you can enable the
DHCP to use a dynamic IP address.
<Disabled> (default)
<Enabled>
[DNS server IP address]
With this entity you can configure the
DNS server IP address.
default = <0.0.0.0>
[Static IP address]
With this entity you can assign static IP
address to the MSC-L when the DHCP
is disabled.
default = <192.168.1.100>
[Gateway IP address]
With this entity the default gateway IP
address can be entered.
default = <0.0.0.0>
[Subnet mask]
With this entity the subnet mask can be
entered.
default = <255.255.0.0>
[Modbus byte order]
With this entity you can select the byte
representation of the information
retrieved by the modbus protocol:
• Little endian: the LSB is sent first.
• Big endian: the MSB is sent first.
<Little endian> (default)
<Big endian>

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English