Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 139
5.13.2.2.2 Device Configuration . I/O Binding . Outputs
On the Bay Configuration . I/O binding screen, select <Outputs>. The
following entities are displayed on the Bay Configuration . I/O Binding
Outputs screen.
5.13.2.3 Bay Configuration . Alarms
1. On the System Config . Bay screen, select <Alarms>.
The System Config . Bay . Alarms screen appears.
Alarms can have the following alarm actions.
 <Disabled>:
The alarm is ignored.
 <Display>:
 The alarm appears on the display.
 The alarm-indication output is set to ON.
 <Display shutdown>:
 The alarm appears on the display.
 The alarm-indication output is set to ON.
 The alarm-shutdown output is set to ON.
 Running batch is stopped.
[Vapour recovery]
With this entity you can configure the
physical source for the vapour recovery
input.
Any of the unused DI-DC-n, DI-AC-n, QPI-
n, AI-n, or None.
The default value is
<None>.
Entity Description Value range
[Bay active]
With this entity you can configure the
output, which indicates the bay active.
Any of the unused DO-EMR-n, DO-SSR-n,
PO-n, or None.
The default value is
<None>.
Entity Description Value range

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English