Operation - Transfer
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 286 Installation & Operation Manual
Honeywell
Batch Details
Batch Number The batch number associated with the current batch
record.
Batch Start Time The time at which the batch began (sampled from
RTC entity).
Batch Start Date The date when the batch began (sampled from
RTC).
Batch Stop Time The time at which the batch ended (sampled from
RTC entity).
Batch Stop Date The date when the batch ended (sampled from
RTC).
Arm Name The name of ARM used for dispensing the blended
product.
Arm Number The number of the arm used for bringing the batch.
Blend Type Specifies the type of blend (none, ratio, or side
stream).
Batch Recipe Definition The recipe used during the batch (name, blend %,
API symbol).
W&M Compliant Batch If the device was W&M compliant during the
complete batch.
Unintended Stop if the batch stopped unexpectedly during the load.
Compartment Number The trailer compartment associated with this batch.
Returned Quantity The amount of product in the compartment at the
start of the batch.
Preset Volume When used with a preset, this value defines the
preset quantity for the batch. If not used in preset
mode, then this value is 0.
Product Stream Details
Batch Product Name The name of product.
Batch Product Calibration
Number
A counter incremented each time flow meter
calibration is performed.
Batch Product Gross
Observed Volume
The total observed volume of the product dispensed
during the batch.
Batch Product Gross Standard
Volume
The total gross standard volume (net) of the product
dispensed during the batch.
Batch Product Mass The total mass of the product stream for the batch.
Actual Blend Percentage The actual percentage of the product in the finished
product.
Batch Product Start
Accumulated Gross Observed
Volume
The gross observed accumulated volume at the
start of the batch for the stream.
Transaction Record
Parameter
Description
To Next Page
Loading...
Need help?
General
