IBM i 830 User Manual

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
34FF Format in progress
The device indicated that a format is in progress. When the format is
complete, the device should be useable. No action is required. This
reference code is logged for information only.
FFF3 Disk media format bad FCDEV
FFF4 Disk device problem FCDEV
FFF5 Disk sector read error FCDEV
FFF6 Disk device detected recoverable error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
FCDEV
FFFA Disk device wrong response was recovered by the IOP
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
FCDEV
FCIOA
OPT_CLN
FFFE Temporary Fibre Channel interface error
A disk unit service action is recommended only if the Service Action Log
contains an entry for this reference code. For more information about the
Service Action Log, see “Hardware Service Manager” in the iSeries Service
Functions.
FCINTF
FCDEV
FCIOA
OPT_CLN
Disk Unit Failing Items
Notes:
1. To determine the failing items, go to “Failing Items” on page 479.
2. To determine the associated part numbers, go to “Type, Model, and Part
Number list” on page 885.
3. To determine the parts associated with symbolic FRUs, such as “ANYBUS”,or
“DEVTERM”,goto“Symbolic FRUs” on page 495.
Failing Item Description Document Description
FCDEV Fibre Channel device Problem Analysis; Symbolic FRU Isolation
FCINTF Fibre Channel interface Problem Analysis; Symbolic FRU Isolation
FCIOA Fibre Channel IOA Problem Analysis; Symbolic FRU Isolation
FCPORT Port not operational Problem Analysis; Symbolic FRU Isolation
IOP I/O processor card Problem Analysis; Symbolic FRU Isolation
OPT_CLN Fiber optic cleaning kit Problem Analysis; Symbolic FRU Isolation
(2746) Twinaxial –Workstation Adapter Reference Codes
1. Look at characters 5 through 8 of the top 16 character line of function 11 (4
rightmost characters of word 1). These 4 characters are the unit reference code.
2. Look at the last 8 characters of the top 16 character line of function 12 (word 3).
These 8 characters are the direct select address of the card (BBBBCcbb). The
2105
118
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English