Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
F000 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An operation has timed out. Look in the Service Action Log of
the Primary partition for a failure during the last IPL of the secondary
partition. Use the new SRC and go to “Chapter 2. Unit Reference Codes”
on page 59. If you do not find a failure in the Service Action Log from the
last IPL of the partition then record all words of this SRC and call your
next level of support. See the iSeries Service Functions information.
LPARSUP
F001 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A bus time out occurred on a command to the load source IOP.
FI00098
FI00096
F002 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Timeout waiting for the load source hardware driver.
Initiate a main store dump of secondary partition.
LPARSUP
F003 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Partition processors did not start LIC within the timeout
window.
FI00099
F004 to F005 A problem occurred during power off of secondary partition.
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. From the ″Work with partition status screen″ the primary
partition issued a power down message to the secondary partition but the
message response from the secondary timed out.
Initiate a main store dump of the secondary partition.
FI00099
F006 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The LID load operation for the secondary partition’s IPL timed
out.
FI00098
FI00096
(B2xx) Logical Partition Failing Items
Note: If the system has logical partitions, perform this procedure from the logical
partition that reported the problem.
Failing Item Description Document Description
LPARCFG Configuration error Problem Analysis; Symbolic FRU Isolation
LPARSUP Call your next level of support for assistance Problem Analysis; Symbolic FRU Isolation
MEDIA Attached storage device Problem Analysis; Symbolic FRU Isolation
(B437) System Processor Reference Codes
The system processor detected a failure.
B2xx
Chapter 2. Unit Reference Codes 215
To Next Page
Need help?
General