0MMM
Model number of failing device (i.e. MMM=’001’)
SSSSSSSS
System Reference Code - this SRC is used to determine why the primary
console failed to respond.
PPPP Cause code
lmmm Level indicator plus 3″digit model number of failing device
LMMM
Level indicator plus 3″digit model number (for example, 0001)
MIGV EP
General system status.
NNNN
Number of disk device facilities that are missing
pppp pppp
Programming reference code
qqqq qqqq
Programming reference code qualifier
rrrr Outboard failing unit reference code (URC)
RRRR Unit reference code (URC)
ssss Serial number of failing unit
tttt Outboard failing unit type number (for example, 6607)
TTTT Type number or card identification number (hex)
uuuu Unit-specific data
ww SRC type
ZZZZ Reserved
Note: Function 20 displays the machine type (940x), model number, and
processor feature code.
Important Cryptographic I/O Processor Information
Attention: The type 2620 or type 2628 cryptographic I/O processor should not be
removed or disconnected except by qualified IBM service personnel. Performing
this action for any reason causes the loss of the primary encryption key.
Before disconnecting or removing the cryptographic I/O processor, ensure that the
customer has access to a record of the primary encryption key. After any service
action that involves disconnecting or removing the processor, the customer must
reinstall the primary encryption key. This is the only way that the customer can
access the data encryption function. Refer the customer to this document for more
information:
IBM Common Cryptographic Architecture Services/400 Installation and Operating Guide,
SC41-0102
SRC Address Formats
942
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
To Next Page
Loading...
Need help?
General