IBM i 830 User Manual

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
3100 I/O processor card detected interface error FCINTF
ANYFC
FCIOA
OPT_CLN
3120 I/O processor detected a port failure FCPORT
FCIOA
FCDEV
OPT_CLN
3140 I/O Processor detected that a port is now operational
This reference code and the 3120 reference code that occurred before it
require no service action, since the port is now operational.
3400 I/O processor card detected device error FCDEV
FCINTF
ANYFC
FCIOA
OPT_CLN
34FF Format in progress
The device indicated that a format is in progress. When the format is
complete, the device should be useable. No action is required. This
reference code is logged for information only.
8130, 8140 Recovered Fibre Channel interface error
No action required. This reference code is logged for information only.
8141 IOA detected recoverable device error
No action required. This reference code is logged for information only.
8145 A recoverable I/O processor error occurred. FCIOA
OPT_CLN
8146 Disk device detected recoverable error FCDEV
8150 A permanent I/O processor failure occurred FCIOA
IOP
ANYFC
OPT_CLN
8151 I/O processor Licensed Internal Code error AJDGP01
FCIOA
IOP
OPT_CLN
8155 to 8156 A permanent I/O processor failure occurred AJDGP01
FCIOA
OPT_CLN
9091 to 9092 Incorrect hardware configuration change has been detected.
Reset the I/O processor and then IPL the I/O processor. For information
on how to reset and IPL the I/O processor, see “Debug the Resource” in
the “Hardware Service Manager” section of the iSeries Service Functions.If
an I/O processor reset and I/O processor IPL does not resolve the
problem, contact your next level of support.
SVCDOCS
FF3D Recovered IOA error FCIOA
IOP
OPT_CLN
2765, 2766
132
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English