IBM i 830 User Manual

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0395 to 0397, 039D
to 039F
Tape unit detected a write error on tape medium
Perform the Action for reference code 030B.
ML2TMED
46G2227
03AE, 03B0 Tape unit detected a read or write error on tape medium
Perform the Action for reference code 030B.
ML2TMED
46G2227
03B3 to 03B4 Tape unit detected a write error on tape medium
Perform the Action for reference code 030B.
ML2TMED
46G2227
03B5 Tape unit detected a read error on the tape medium
Perform the Action for reference code 030B.
ML2TMED
46G2227
0417 to 0419, 0458,
045A, 0467 to
0468, 046D, 0498
to 049A, 049C,
04A1 to 04A8,
04AB to 04AD,
04FA, 04FC to
04FD
Tape unit failure
The tape drive reported a hardware error to the IOP; the amber light on
the tape drive may be blinking.
Perform “TU-PIP2” on page 448.
46G2227
ML2TMED
46G3934
42F7300
3002 I/O processor addressed the tape unit; no response
The tape drive did not respond to commands from the IOP. Perform the
following:
1. Ensure that the system interface cable is connected.
2. Ensure that power is on.
If the above items are correct, perform the following:
1. “TU-PIP1” on page 446.
2. “TU-PIP3” on page 451.
46G2227
46G3934
FI00830
FI00141
46G2599
17G1500
42F7300
3004 Tape unit failed after Licensed Internal Code was loaded
The tape drive does not respond to IOP commands after new Licensed
Internal Code was transferred to the tape drive.
Perform “TU-PIP4” on page 453.
46G2227
3005 Blank tape or BOT encountered
The tape drive has found a blank tape or BOT.
When using a new data cartridge, the tape must first be initialized.
This error can also occur when reading a tape if that tape was removed
from the tape drive before writing was complete.
Also see the Action for reference code 030B.
ML2TMED
46G2227
AJEDA00
3010 Illegal or unsupported tape unit response
The tape drive returned a response to the IOP that is illegal or is not given
support.
Perform the following:
1. “TU-PIP1” on page 446.
2. TU-PIP3 in “Tape Unit Problem Isolation Procedures” on page 445
46G2227
AJEDA00
7208
168
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English