IBM i 830 User Manual

Reference
Code
Description/Action Perform all actions before exchanging
Failing Items
Failing Item
9899 Problem analysis completed, the problem has been
corrected.
This reference code is used for ending Online Problem
Analysis when no problem was found or the problem was
corrected.
ULYFIXD
9900 Licensed Internal Code for tape unit was not upgraded
The I/O processor loading of Licensed Internal Code (LIC)
to the programmable tape drive was not completed.
The tape drive will continue to operate with the previous
LIC. You may do either of the following:
v Wait for next IPL when the system will attempt to load
the LIC for the tape drive again.
v Perform “TU-PIP4” on page 453 to reset the IOP and the
tape drive. When the IOP is reset, if the device has the
wrong level of LIC, the IOP will attempt to load the
new LIC.
ULYWAIT
FF09 Licensed Internal Code for tape unit was not upgraded
The I/O processor loading of Licensed Internal Code (LIC)
to the programmable tape drive was not completed.
The tape drive will continue to operate with the previous
LIC. You may do either of the following:
v Wait for next IPL when the system will attempt to load
the LIC for the tape drive again.
v See the system service documentation to reset the IOP
and the tape drive. When the IOP is reset, if the device
has the wrong level of LIC, the IOP will attempt to load
the new LIC.
ULYWAIT
FF4D I/O processor successfully recovered from temporary error
No action required. This reference code is logged for
information only.
When the system is available, display the operator
messages, find message CPI946B, and press F14 to run
online problem analysis to see if the error threshhold has
been exceeded.
86G9251
FI00141
EXTSCSI
17G1934
86G9274
86G9255
AJSLC01
FF5D I/O processor successfully recovered from temporary error
No action required. This reference code is logged for
information only.
When the system is available, display the operator
messages, find message CPI946B, and press F14 to run
online problem analysis to see if the error threshhold has
been exceeded.
86G9251
86G9274
EXTSCSI
FI00141
17G1934
86G9255
FFF6 Tape volume statistics logged (no action required)
No action required. This reference code is logged for
information only.
9427
Chapter 2. Unit Reference Codes 177

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English