Perform the following to determine the part number for the failing air-moving
device.
Note: The address of the failing frame and unit is shown in the second, third and
fourth characters of the 4 leftmost characters of the SRC.
11-x xFFU-xxxx (F=frame and U=unit).
1. Is the failing air moving device in a system unit?
No Yes
↓
Find the reference code in the following list to determine the failing
AMD. Then see “Locations and Addresses” on page 705 to determine
the location of the failing item.
For Models 840/SB3 except 9079:
Reference Code FRU Part Number
7000, 7500 AMD B01 21H6959
7001, 7501 AMD B02 21H6959
7002, 7502 AMD B03 21H6959
7003, 7503 AMD B04 21H6959
For Models 830/SB2 and FC 9079 frame:
Reference Code FRU Part Number
7610, 7611 AMD B01 04N3345
7620, 7621 AMD B02 04N3345
7710, 7711 AMD BP1 04N3345
7720, 7721 AMD BP2 04N3345
This ends the procedure.
2. The failing air moving device is in a secondary expansion unit. Find the unit
reference code in the following lists to determine the failing AMD or AMD and
part number. Then see Migrated Expansion Tower Problem Analysis, Repair and
Parts to determine the location of the failing item.
For 5072, 5073, 5077, 5082, 5083 frames:
Reference Code FRU Part Number
7000 AC Module ACMODUL
7001 AMD 1 46G3510
7002 AMD 2 46G3510
7003 AMD 3 46G3587
7004 AMD 4 46G3587
For FC 5065 and FC 5066 I/O frame:
Symbolic FRUs
498
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
To Next Page
Loading...
Need help?
General