IBM i 830 User Manual

Table 47. FRU locations and Failing Components for Integrated xSeries Adapter Card (IXA)
— Machine Type 1519
Position FRU Name Possible
Failing
Component
Type, CCIN, or
PN
Remove/Install
Procedure
Position
depends on
xSeries Server
machine type
and model.
To locate,
follow the HSL
cable
connections or
the SPCN cable
connections to
the Integrated
xSeries Adapter
card.
Integrated
xSeries Adapter
The failing
component is
either:
v HSL I/O
Bridge
v Multi -
adapter
Bridge
v SPCN
v Embed - ded
IOP
v Card
Backplane
CCIN = 2689
listed under
machine type
1519.
Note: machine
type 1519 is not
an iSeries
machine type
or an xSeries
machine type.
Machine type
1519 was
created to list
feature 2689
separately from
iSeries and
xSeries machine
types.
Go to “Type 2689 –
Integrated xSeries
Adapter (IXA)” on
page 683.
Note: Verify the
frame ID by
examining the frame
ID displayed on the
card’s LED which is
visible when the
panel covering the
card is removed.
Note: In an OS/400
Opticonnect
environment it is
possible to have
multiple xSeries
Servers with the
same frame ID
displayed but the
power controlling
system is different
than the system you
are servicing. Verify
the SPCN cable is
connected to the
system you are
servicing.
HSL cables on
the HSL ports
HSL cable HSL connection See “Type,
Model, and
Part Number
list” on
page 885.
Go to “HSL Cables –
Concurrent” on
page 653.
Locations and Addresses
Chapter 5. Locations, Addresses, and Part Listings 749

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English