EasyManuals Logo
Home>Keithley>Multimeter>2701

Keithley 2701 User Manual

Keithley 2701
506 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
2-30 Close/Open Switching Module Channels Model 2701 User’s Manual
Identifying installed modules and viewing closed
channels
On power-up, the model numbers of installed switching modules are displayed briefly.
If a Model 7700, 7701, 7702, 7703, 7705, 7708, or 7709 switching module is removed
while the Model 2701 is on, the instrument will operate as if the module is installed. That
is, the Model 2701 will operate as if the pseudocard is installed.
NOTE If a Model 7706 or 7707 is removed while power is on, error +523 “Card
hardware error” will occur and the module will be removed from the system.
NOTE In general, it is not recommended to install or remove switching modules with
the power on.
CARD menu
The CARD menu identifies the switching modules installed in the mainframe, and is used
for the following operations:
Configure digital inputs, digital outputs, and analog outputs for switching modules
that have one or more of those capabilities (i.e., Models 7706 and 7707).
View the analog input channels that are presently closed. Also, read digital input
ports, digital output ports, and analog output values for switching modules that
have one or more of those capabilities.
Menu navigation keys — Once in the menu structure, the manual range keys ( and )
and the cursor keys ( and ) are used to display menu items and options, and set
parameter values. With the desired item, option, or setting displayed, press the ENTER
key to select it. You can cancel a pending selection (and exit the menu structure) by
pressing the EXIT key.
Press the SHIFT key and then the CARD key to display the CARD menu. The Card menu
tree is shown in Figure 2-11. The items and options of the menu are explained as follows:
NOTE Identifying installed modules — If you simply want to identify installed modules
or pseudocards, select CONFIG or VIEW and use the
or key to check each
slot. When finished, press EXIT.

Table of Contents

Other manuals for Keithley 2701

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keithley 2701 and is the answer not in the manual?

Keithley 2701 Specifications

General IconGeneral
BrandKeithley
Model2701
CategoryMultimeter
LanguageEnglish

Related product manuals