Keithley 6430 User Manual

17-10 SCPI Command Reference
Table 17-5
SENSe command summary
Command Description
Default
parameter
SCPI
Source
memory
[:SENSe[1]]
:DATA
[:LATest?]
:FUNCtion
:CONCurrent <b>
:CONCurrent?
[:ON] <function list>
:ALL
:COUNt?
[:ON]?
:OFF <function list>
:ALL
:COUNt?
:OFF?
:STATe? <name>
:CURRent[:DC]
:RANGe
[:UPPer]
<n>|UP|DOWN
[:UPPer]?
:AUTO <b>
:AUTO?
:ULIMit?
:LLIMit <n>
:LLIMit?
Sense 1 Subsystem:
Path to SENSe[1] data.
Return only most recent reading.
Select measurement function(s):
Enable or disable ability to measure more than
one function simultaneously. When disabled,
volts function is enabled.
Query concurrent state.
Specify functions to enable (VOLTage[:DC],
CURRent[:DC], or RESistance).
Enable all functions (concurrent enabled) or
enable ohms function (concurrent
disabled).
Query number of functions that are enabled.
Returns list of functions that are enabled.
Specify functions to disable:
(VOLTage[:DC], CURRent[:DC], or
RESistance).
Disable all measurement functions.
Query number of functions that are disabled.
Returns list of functions that are disabled.
Query state of specified function: 1 (on) or 0
(off).
Path to configure current:
Configure measurement range:
Select range by specifying the expected
current reading; 0 to ±105e-3.
Query range.
Enable or disable auto range.
Query auto range.
Returns I compliance range.
Set auto ranging lower limit (-105e-3 to
105e-3).
Query auto ranging lower limit.
ON
CURRent
VOLTage,
RESis-
tance
1.05e-4
ON
1e-6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1
✓
1
1
If source V is active.

Keithley 6430 Specifications

General

Brand	Keithley
Model	6430
Category	Measuring Instruments
Language	English