Keithley 6430 User Manual

1-30 Getting Started
Table 1-8
Trigger configuration menu
Configuration menu item Description
CONFIG TRIG Configure triggering.
CONFIGURE TRIGGER
ARM LAYER Configure trigger model arm layer.
ARM IN Select arm layer detection event.
IMMEDIATE Immediate event detection.
GPIB GPIB GET or *TRG.
TIMER After timer interval elapses, enter interval.
MANUAL Front panel TRIG key.
TLINK Enter TLINK line and state.
ONCE Bypass event detection once.
NEVER Never bypass event detection.
↓STEST When Digital I/O SOT line is pulsed low.
ONCE Bypass event detection once.
NEVER Never bypass event detection.
↑STEST When Digital I/O SOT is pulsed high.
ONCE Bypass event detection once.
NEVER Never bypass event detection.
↑↓STEST When Digital I/O SOT line is pulsed high or low.
ONCE Bypass event detection once.
NEVER Never bypass event detection.
ARM OUT Configure arm layer output trigger.
LINE Select trigger link output line (1-4).
EVENTS Enable/disable events.
TRIG LAYER EXIT Enable (ON) or disable (OFF) on exiting trigger layer.
TL ENTER Enable (ON) or disable (OFF) on entering trigger layer.
COUNT Specify arm count.
FINITE Programmable count.
INFINITE Never ending count.
TRIG LAYER Configure trigger layer of trigger model.
TRIGGER IN Select trigger layer detection event.
IMMEDIATE Trigger event occurs immediately.
TRIGGER LINK Select trigger link line as event (1-4).
TRIGGER OUT Configure trigger layer output trigger.
LINE Select trigger link line (1-4).
EVENTS Enable (ON) or disable (OFF) for SOURCE, DELAY,
and MEAS.
DELAY Program trigger delay time.
COUNT Program trigger count.
HALT Return unit to idle state.

Keithley 6430 Specifications

General

Brand	Keithley
Model	6430
Category	Measuring Instruments
Language	English