To Next Page

To Previous Page

SCPI Command Reference 17-87

Read condition registers

:CONDition?

:STATus:MEASurement:CONDition? Read Measurement Condition

:STATus:QUEStionable:CONDition? Read Questionable Register

:STATus:OPERation:CONDition? Read Operation Condition

Description These query commands are used to read the contents of the condition

registers.

Select default conditions

:PRESet

:STATus:PRESet Return registers to default conditions

Description When this command is sent, the following SCPI event registers are cleared

to zero (0):

1. Operation Event Enable Register.

2. Event Enable Register.

3. Measurement Event Enable Register.

NOTE The Standard Event Register is not affected by this command.

Error queue

[:NEXT]?

:STATus:QUEue[:NEXT]? Read Error Queue

Description As error and status messages occur, they are placed into the Error Queue.

This query command is used to read those messages. See Appendix B for a

list of messages.

NOTE The :STATus:QUEue[:NEXT]? query command performs the same function as the

:SYSTem:ERRor? query command. See “:SYSTem subsystem.”

:CLEar

:STATus:QUEue:CLEar Clear Error Queue

Description This action command is used to clear the Error Queue of messages.

Keithley 6430 User Manual

Other manuals for Keithley 6430