Keithley 6430 User Manual

SCPI Command Reference 17-15
Command Description
Default
parameter
SCPI
Source
memory
:SOURce[1]
:VOLTage
:STARt <n>
:STARt?
:STOP <n>
:STOP?
:STEP <n>
:STEP?
:SPAN <n>
:SPAN?
:CENTer <n>
:CENTer?
:SOAK <NRf>
:SOAK?
:SWEep
:SPACing <name>
:SPACing?
:POINts <n>
:POINts?
:DIRection <name>
:DIRection?
:RANGing <name>
:RANGing?
:LIST
:CURRent <NRf>
:APPend <NRf>
:POINts?
:CURRent?
:VOLTage <NRf>
:APPend <NRf>
:POINts?
:VOLTage?
Specify start level for V-sweep; -210 to 210.
Query start level for voltage sweep.
Specify stop level for V-sweep; -210 to 210.
Query stop level for voltage sweep.
Specify step value for V-sweep; -420 to 420.
Query step value for voltage sweep.
Specify span; -420 to 420.
Query span.
Specify center point; -420 to 420.
Query center point.
Set first sweep point soak time (0.00000 to
9999.999s).
Query soak time.
Configure SWEep source mode:
Select sweep spacing type (LINear or
LOGarithmic).
Query sweep spacing.
Specify number of sweep points (2 to 2500).
Query number of points in sweep.
Sweep from start to stop (UP) or from stop to
start (DOWN).
Query sweep direction.
Select source ranging mode (BEST, AUTO,
or FIXed).
Query source ranging mode.
Configure LIST source mode:
Create list of I-Source values; -0.105 to
0.105.
Add I-Source values to end of list.
Query number of source values in list.
Query I-Source list.
Create list of V-Source values; -210 to 210.
Add V-Source values to end of list.
Query number of source values in list.
Query V-Source list.
0
0
0
0
0
0.00000
LINear
2500
UP
BEST
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Table 17-6 (cont.)
SOURce command summary

Keithley 6430 Specifications

General

Brand	Keithley
Model	6430
Category	Measuring Instruments
Language	English