4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 101
Table 4-29. Filesystem Browser Page
Filesystem
Browser Page
Settings
Description
Create
File
Enter the name of the file you want to create, then click Create.
Directory Enter the name of the directory you want to create, then click
Create.
Upload File Enter the path and name of the file you want to upload via
HTTP or use the Browse button to select the file, then click
Upload.
Copy File
Source Enter the location where the file you want to copy resides.
Destination Enter the location where you want the file copied. After you
specify a source and destination, click Copy to copy the file.
Move File
Source Enter the location where the file you want to move resides.
Destination Enter the location where you want the file moved. After you
specify a source and destination, click Move to move the file.
TFTP
Action Select the action that is to be performed via TFTP. Choices
are:
Get = a “get” command will be executed to store a file locally.
Put = a “put” command will be executed to send a file to a
remote location.
Mode Select a TFTP mode to be used. Choices are:
ASCII
Binary
Local File Enter the name of the local file on which the specified “get” or
“put” action is to be performed.
Remote File Enter the name of the file at the remote location that is to be
stored locally (“get’) or externally (“put”).
Host Enter the IP address or name of the host involved in this
operation.
Port Enter the number of the port involved in TFTP operations. Click
Transfer to complete the TFTP transfer.