Lantronix EDS4100 User Manual

B: Configuration Using XML
EDS4100 4 Port Device Server User Guide 162
Special XCR Groups
The following XCR groups are used to delete settings, control how the XML is processed,
or control the device. They are not used for configuration purposes. For example, the
Reboot group, which causes the EDS4100 to reboot, is not a configurable setting that
can be exported. However, it may be added to an XML configuration record manually to
ensure the EDS4100 reboots after applying a new configuration settings.
For more information about these XCR groups, refer to the appropriate page.
 arp entry ⎯ see page 163.
 controlling cps ⎯ see cp on page 163.
 deleting cp groups ⎯ see cp delete on page 163.
 deleting http authentication for a user or uri ⎯ see user delete and uri delete on page
165.
 deleting ip filters ⎯ see filter delete on page 166.
 deleting ssh configurations ⎯ see ssh client on page 169.
 deleting ssl config ⎯ see ssl delete on page 170.
 exit cli ⎯ see page 165.
 level passwords ⎯ see page 166.
 process method ⎯ see page 168.
 reboot ⎯ see page 168.
 restore factory defaults ⎯ see page 168.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English