4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 54
Tunnel – Connect Mode Page
Connect Mode determines how the EDS4100 initiates a connection to a remote host or
device. If you click Connect Mode at the top of one of the Tunnel pages, the Tunnel –
Connect Mode page appears. This page lets you select the method for starting a tunnel
in Connect mode and select other settings for the tunnel selected at the top of the page.
Any configuration changes you make on the displayed page are applied to the tunnel you
selected at the top of this page. For example, if Tunnel 1 is selected, any configuration
changes you make are applied to tunnel 1.
For more information about Connect mode, see Connect Mode on page 123.
Figure 4-16. Tunnel – Connect Mode Page
To Next Page
Loading...
Need help?
General