Lantronix EDS4100 User Manual

A: Configuration Using Telnet or Serial Port
EDS4100 4 Port Device Server User Guide 142
Interface 1 Level
Command
Description
speed 10
Sets the Ethernet link speed to 10 Mbps, duplex is
unchanged.
speed 10 full
Sets the Ethernet link speed to 10 Mbps, full-duplex.
speed 10 half
Sets the Ethernet link speed to 10 Mbps, half-duplex.
speed 100
Sets the Ethernet link speed to 100 Mbps, duplex is
unchanged.
speed 100 full
Sets the Ethernet link speed to 100 Mbps, full-duplex.
speed 100 half
Sets the Ethernet link speed to 100 Mbps, half-duplex.
speed auto
Sets the Ethernet link speed to auto-negotiation.
write
Stores and applies the current configuration into
permanent memory.
Device Menu
The following configurable parameters reside in the Device configuration menu.
Device
Configuration
Command
Description
clrscrn
Clears the screen.
cpu speed <mhz>
Sets the CPU speed.
<mhz> = speed of the CPU.
dvt
Displays the DVT menu.
exit
Exits the Device menu and returns to the Enable menu.
long name <name>
Renames the EDS4100’s long name as displayed in Command
mode and the Web Manager.
<name> = new long name to be assigned to the EDS4100.
no cpu speed
Reverts the query port counters to the last aggregate value.
no long name
Resets the EDS4100’s long name to the default value.
no short name
Resets the EDS4100’s short name to the default value.
short name
<name>
Sets the EDS4100’s short name, displayed in Command mode
and the Web Manager.
<name> = maximum of eight characters.
show
Displays system information.
show buffer pool
Displays information on buffer pool.
show hardware
information
Displays the hardware information for the EDS4100. Shows the
CPU type, CPU speed, Hardware ID, flash size, RAM size, and
hard drive size.
show history
Display previously entered commands.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English